Tuesday, November 17, 2009
Back pain can take many forms, all of which are at least a disruption to your life and at worst a major obstacle to normal living. In many cases, the sciatic nerve has a close relationship with the symptoms that a pain sufferer exhibits, and it’s not uncommon to hear terms like ‘sciatica’ and ‘pinched nerve’ thrown around in connection to the pain. Sciatica is a set of symptoms that are displayed by a patient whose sciatic nerve is being compressed, or ‘pinched’ due any number of factors. At our comprehensive treatment center in NYC, Living Well Medical, we regularly treat patients who have debilitating pain related to a pinched nerve. We bring together a number of non-surgical treatments that include chiropractic adjustment, non-surgical spinal decompression with the DRX-9000 for herniated or bulging spinal discs, pain management with a Medical Doctor, cold laser therapy and physical therapy.
As mentioned above, there are several reasons that a nerve like the sciatic nerve can be pinched and compressed, leading to severe and chronic pain. Perhaps the most common, however, is a herniated or bulging spinal disc as a result of long-term wear or trauma.
When a weakness develops in the fibrous outer wall of a disc, the fluid from the interior of a disc can be forced out into contact with the sciatic nerve causing irritation, inflammation and general pain. This is typically referred to as nerve impingement, and severe nerve impingement of the lumbar nerve roots can cause the symptoms we know of as sciatica.
Sciatica often encompasses problems like leg pain, lower back pain, pain in the buttocks, numbness, tingling and even muscle weakness. Different people will experience different combinations of these symptoms, but the universal aspect is significant pain that makes an active life difficult. That’s where our office in NYC can help patients without the fears that go along with surgery or long-term pain medications.
Specifically intended for treatment of herniated discs and other conditions that cause severe low back pain, non-surgical spinal decompression with the DRX-9000 is an alternative to back surgery that has been safely helping patients stop the pain for years.
The DRX-9000 is a computer-controlled therapeutic device that applies specific amounts of force to targeted areas of the spine (based on where the herniated or bulging disc is located). By placing patients in a harness that helps directs the stretches to the lower back, malfunctioning discs can be ‘pumped’ and made to absorb more nutrients and fluids that will aid them in healing themselves. Because the discs are mostly avascular (having little blood supply), the nutrients are an important part of the healing process. Stretching through the DRX-9000 can also help create a pocket of negative pressure inside of the disc that can draw herniated material back to inside the disc over time. At Living Well Medical in NYC, our chiropractic physician, Dr. Steven Shoshany has been helping patients with his patented spinal decompression protocol for years.
If you suffer with sciatica and the pain of a pinched nerve due to a herniated disc in NYC, call Living Well Medical at 212-645-8151 or visit our website and find out more about non-surgical spinal decompression therapy with the DRX-9000.
Thursday, November 5, 2009
A great article from SpineHealth-
looking for a great Physical therapist or a Chiropractor in Manhattan,NYC?
Visit us online www.livingwellnewyork.com
11 Ergonomic Tips for Synchronizing Your Workstation and Office Chair
October 29, 2009
by: Sylvia Marten
Having the best designed and most ergonomically-friendly office equipment may not necessarily mean much for preventing back pain, neck pain and other pain if such equipment is out of sync with your workstation, as confirmed in a recent study that provides a great forum for examining how you can adjust an office chair to your work environment.
Detailed in the October issue of the Journal of Occupational and Environmental Medicine, a new study found that workers who received not only new ergonomic office furniture but professional set-up by an ergonomist had less symptoms of musculoskeletal pain and eyestrain 18 months later than those workers who had to set up their new furniture on their own based off instructions.
Now what if your employer can’t afford to hire a professional ergonomist to visit your office during these tough economic times? Well, there are still many ways to be proactive when setting up your office chair and desk just right to your needs and the principles of ergonomics.
Understand the Ultimate Goal
Having a special chair is often viewed as the be-all, end-all of correct office ergonomics. While an ergonomically-designed chair can certainly do wonders, remember that the ultimate goal is to achieve balance between finding a work chair that fits you, provides good support and minimizes stress on the back, and using it correctly in relation to your work environment.
Before providing instant analysis of your chair, examine other factors, including your optimal desk level, how you sit, and the height of your computer screen, and strive to improve on these areas.
Get Suited to Your Work Surface
Rather than just going out and buying a new chair, ask yourself “what type of chair will fit your work station?” Examine how long you sit all day and how you sit at your desk.
Are you semi-seated (similar to sitting on a bar stool) or do you sit straight up? Do you need to adjust your chair? Where is your computer in relation to your body?
Determine your appropriate work surface (which takes into account the position of your arms, elbows and hands in relation to your desk’s height and your laptop or desktop computer) and be sure to have a chair that allows you to attain this specific height.
The correct surface level can vary from profession to profession (for example, architects and draftsmen often prefer to sit higher), and the final decision as to what’s appropriate is thus determined by each individual.
Become a Series of Right Angles While Sitting and Typing
Sit down straight and as close and comfortable as possible to your desk, with your upper arms parallel to the spine and your hands rested on the work surface.
At this point, take a step back and examine whether your elbows are at a 90-degree angle. If they are not, adjust your office chair higher or lower as deemed fit.
Also make sure that your legs are bent at the knees at a 90 degree angle. Try to maintain this ideal sitting posture as much as possible, and if you find yourself slacking, give yourself a break by getting up and stretching.
Don’t Sit Too High Unless Necessary
Did you know that all of our ankles swell up anywhere from 6 to 8 percent by the end of the day, but for patients with back, leg or circulation problems, this swelling can jump from 10 to 15 percent, especially if sitting in a chair that is too high and leaves the feet dangling?
Generally speaking, a seat height ranging from 16 to 21 inches off the ground is suitable for most workers. To tell whether your chair is too high or at the right height for the desk surface, slide your finger underneath your thigh at the front end of the chair.
If this proves easy to do, your chair is likely at a good height. However, if this proves difficult, your chair is likely too high, which can put extra pressure on your feet and require you to proceed to the next tip.
Boost Your Feet in Certain Situations
In situations where you have to lift your feet off the ground because of a chair or even a desk that is too high, or where the chair height is right but you’re not that tall, consider using a foot stool to prop and rest your feet as opposed to leaving them hanging all day long.
Such action will reduce both pressure on the feet and the likelihood of foot pain at the end of the day.
Raise Your Work Surface When Applicable
Standard seats should allow for 2-4 inches between the back of the knees and chair.
However, if you’re a taller worker, you may be familiar with this problem: your chair seat is not long enough for your thighs, which have too much space underneath them. In these rarer situations, raising the work surface level may be necessary to ensure circulation at the back of the knee.
Make a Fist to Your Calf
Ensure that there is enough room between the front edge of your chair and calves by simply making a fist, bringing it to the edge of the chair and pushing it on the calf.
If you can fit your full fist between the front edge and your calf, you likely have enough space for circulation and pressure. If not, your chair is likely too deep.
Adjusting the backrest forward, inserting a cushion, pillow or rolled-up towel to support your lumbar spine (lower back), or purchasing a new office chair are some possible solutions to this problem.
Have the Support of Your Back
Back support is a main focus of many ergonomic chairs, but what makes a chair good in terms of supporting the back?
Ideally your work chair should do a couple of things: provide back support angling just past 90 degrees or up to 90 degrees, and include cushioning that pushes your back forward when sitting back in the chair.
Such low back support is essential in preventing slouching as you tire and minimizing the load or strain on your back. With this in mind, the backrest of an ideal ergonomic office chair is typically between 12 and 19 inches wide.
A lot of times, workers have chairs with great back support but don’t take advantage of these features because they sit on the edge of the chair.
Make a conscious effort to press your bottom against the back of the chair, and avoid slumping or slouching, which places extra stress on the lumbar discs and other structures of the lower back.
Apply A Different Kind of Eye Test
Once your chair has been adjusted to the height of the table, your legs have gotten comfortable and your back is supported, close your eyes and take a deep breath.
Casually look forward with your eyes closed, and then open your eyes, which should be aimed at the center of your computer screen. Depending on whether the computer screen is higher or lower than your gaze, you may need to raise or lower the monitor.
If you need to raise your laptop, consider using a stack of books or even a small box, which has personally helped me reduce the likelihood of neck strain at work.
Adjust Your Armrest
Armrests play an important role in reducing neck and shoulder strain and diminishing the likelihood of slouching forward in your chair.
Adjust the armrest to the point where your arms are slightly lifted at the shoulders. Doing so will allow the armrest to support just the elbow and take weight off the shoulders.
Perhaps after making all these changes, you ultimately decide that you do need a new office chair.
If you find yourself in the market for a new chair, you’ll want to consider many factors, including the seat’s height, width, depth, materials, armrests, back rest, lumbar support and swivel.
For more information, view the following article: Choosing the Right Ergonomic Office Chair. or visit www.livingwellnewyork.com